Kangen Demo

A mind-blowing revelation about common beverages!

Adrian Castro Adrian Castro Irvine, CA
Free Demonstration Video

See Hydrogen Water aka Kangen Water® in Action

Watch the product in real use through a full demonstration - so you can see how the water ionizer generates Hydrogen Water aka Kangen Water®, what it does, and how it fits into your everyday life.

  • A live, eye-opening demonstration
  • 100% free to watch — no obligation
  • See it for yourself in minutes

Adrian Castro

Irvine, CA


6A ID# 7120090

Frequently Asked Questions

Straight answers about Hydrogen Water aka Kangen Water®, Enagic's LeveLuk machines, ordering, service, and distributor support.

Source note: This FAQ is a landing-page-friendly paraphrase of the Enagic USA FAQ.  Before taking action, please verify prices, commissions, warranty, service, and contact details against the current official Enagic page, EnagicWebSystem sites and product manuals.

Hydrogen Water aka Kangen Water® Related Questions

What is Hydrogen Water?

Hydrogen Water is water that contains added molecular hydrogen gas, also written as H₂. The hydrogen may be added through electrolysis, a chemical reaction, or direct hydrogen gas infusion. Hydrogen Water is the broad consumer term many people use when searching for this type of water.

What is Electrolyzed Reduced Water, or ERW?

Electrolyzed Reduced Water, or ERW, is hydrogen-rich water produced through electrolysis. It is called “reduced” because it has reducing properties, often discussed in relation to ORP, or oxidation-reduction potential. ERW is more specific than the broad term Hydrogen Water because it describes how the water is produced.

What is Kangen Water®?

Kangen Water® is Enagic’s branded alkaline ionized water made by Enagic machines. It is commonly discussed in connection with electrolysis, alkaline pH, minerals, hydration, and reducing properties. Kangen Water® is the brand term used in this demonstration.

How are Kangen Water®, Hydrogen Water, and Electrolyzed Reduced Water related?

They are closely related, but not identical. Hydrogen Water is the broad category. Electrolyzed Reduced Water, or ERW, is a more specific type of hydrogen-rich water made through electrolysis. Kangen Water® is Enagic’s branded alkaline ionized water made by Enagic machines. On this page, we use these terms together so visitors can connect the common search term, the technical water term, and the Enagic brand term used in the demonstration.

Will the state of the water change when heated or refrigerated?

Yes. Heating can change both ORP and pH. Refrigeration can change ORP, while pH may remain stable for up to about a week depending on the quality of the source water.

Can Kangen Water® be used to take medication?

No. Medication should be taken with 7.0 pH Clean Water.

What about differences in raw water quality?

The source water matters. City water, well water, low-mineral water, and high-mineral water can all affect pH, ORP, taste, and electrolysis efficiency. Check pH and water bubbles regularly so you know the machine is producing the intended water type.

What are the benefits of consuming Kangen Water®?

Enagic describes the core benefits as minerals and hydration.

What is beauty water, acidic water, and Strong Acidic Water?

Beauty water is acidic water, commonly around pH 5.5 to 6.5. It is described by Enagic as astringent water used for skin care. Strong Acidic Water is a separate non-drinking water type produced by applicable machines.

How do I use Kangen Water® for beauty care?

Enagic recommends drinking alkaline Kangen Water® as part of hydration and using acidic beauty water on the skin. They also recommend regular skin care and foods with vitamins C, A, and E.

How long do Strong Kangen Water and Strong Acidic Water last?

Drinking waters should be used fresh. Refrigerated Kangen Water® and purified water should generally be replaced within 4 to 5 days. Domestic-use waters, including acidic and strong waters, should generally be refreshed about once per week and stored in a full, lightproof container in a cool, dark place.

What is the proper amount or method for drinking Kangen Water®?

Enagic does not give a fixed rule for how much to drink.

How should someone begin drinking Kangen Water®?

Start at a lower pH, commonly around pH 8 to pH 9, then gradually adjust toward pH 9 to pH 9.5 based on personal condition and comfort. Children and seniors should begin even lower. Kangen Water® should not be used to make infant formula.

What is oxidation-reduction potential, or ORP?

ORP is a measure related to the water’s reducing potential. Enagic states that Kangen Water® should have negative ORP for drinking, but the actual number varies by local water supply.

Why doesn't Kangen Water® turn the pH testing solution blue or purple?

This can happen when source water contains carbon dioxide, especially in well-water areas. The water may test closer to neutral even after electrolysis. Fresh testing and checking for bubbles can help confirm production.

What are the white bits floating in Kangen Water®?

They are usually mineral clusters from the source water and electrolysis process. Enagic says these mineral clusters are not harmful to drink. Running acidic water mode regularly can help clean the appliance. Avoid aluminum or anodized aluminum containers when mineral buildup is present.

What is the relationship between ORP and pH?

ORP is closely connected to pH and the original water supply. If the source water has a low pH, ideal ORP may be harder to achieve.

What is the white fogginess in Kangen Water®?

The white fogginess is generally hydrogen gas released during electrolysis. It should fade after the water rests for a short time.

Machine Related Questions

Why is the appliance leaking?

A common cause is a cartridge stopper or O-ring issue, especially after shipping or cartridge replacement. Enagic says this is usually not a mechanical fault.

How do I use the spout stand?

Keep the discharge hose and stand positioned correctly. If the hose is bent or placed too high, the machine may not produce the right water balance. Check pH and hydrogen bubbles as a daily habit.

How do you use the reset switch?

Press the reset switch during initial setup and after filter replacement until it beeps. This activates the machine’s monitoring and display functions.

How many years does the electrolysis cell remain effective?

Enagic states that the electrolysis cell uses titanium plates plated with platinum and, with automatic cleaning, should last about 15 years.

What should I do when I notice built-up clusters in my water?

Mineral clusters can form from normal source-water minerals during electrolysis. For containers, Enagic recommends soaking with vinegar for 12 to 15 hours, or using citric acid. Running beauty water for 2 to 3 minutes can also reduce minerals. Clean Kangen Water® containers at least every three months.

How is the machine cleaned?

LeveLuk machines include automatic cleaning. Enagic also recommends using the beauty water setting regularly, especially in high-mineral-water areas, because it reverses polarity and helps remove mineral crystals from the electrolysis cell.

The upper flexible pipe leaks acidic water when set on beauty care water. How can I stop it?

Use the beauty water setting to reverse polarity and remove mineral scale from the electrode plates. This supports proper acidic water production and can help protect machine durability.

What if there is no cartridge replacement notice even after a year?

The display notifies users after the machine reaches the programmed water volume, listed by Enagic as 1,500 gallons. Make sure the reset button was pressed after installing the filter.

What is different about LeveLuk electrolysis cells?

Enagic describes LeveLuk cells as using five or seven larger electrolysis plates designed for durability and higher water production. A microcomputer controls the different modes and voltage settings.

How does the automatic draining system work?

After water flow stops, the system drains remaining water through the gray hose. Enagic says this takes about 30 seconds. Keep the spout hose lower than the appliance so water can drain properly.

The flexible pipe is not allowing smooth water flow. What should I do?

High-mineral water can create crystals that clog the outlet. Cleaning may be needed, and restricted flow can also mean the machine is due for deep cleaning.

What happens to the Kangen Water® outlet when switching modes?

In normal modes, Kangen Water® and Strong Kangen Water come from the upper flexible pipe, while acidic waters come from the gray discharge hose. In beauty water mode, polarity is reversed, so the water outlets switch. This mode also helps clean calcium crystals from the machine.

Support and Contact Questions

Who should I contact for distributor support, filters, or supplies?

Enagic lists Distributor Support & Filter/Supplies at (424) 307-0005, with normal hours of Monday through Saturday, 6am to 6pm Pacific Time. The FAQ also lists extended hours and live chat access on the official Enagic website.

Who should I contact for commission questions?

The Enagic FAQ lists Commission support hours as Monday through Friday, 9am to 6pm Pacific Time, with email and fax options shown on the official support page.

Who should I contact for finance questions?

The Enagic FAQ lists Finance support at (424) 307-0530, Monday through Friday, 9am to 6pm Pacific Time. Live chat is also listed on the official Enagic website.

Who should I contact for collections?

The Enagic FAQ lists Collections at (424) 444-6088, Monday through Friday, 9am to 6pm Pacific Time. If calling outside regular business hours, leave a voicemail.

Who should I contact for order corrections after registration?

The Enagic FAQ points users to COD, the Centralized Operation Department, for inquiries related to order corrections after registration.

Who should I contact for EFC?

The Enagic FAQ lists EFC support at (424) 309-1025, Monday through Friday, 9am to 6pm Pacific Time, with email listed on the official page.

Miscellaneous Questions

How should orders be booked?

Enagic says the fastest service is to place orders through the official Enagic shop or submit them through the official order email listed on the Enagic site.

What is calcium addition?

Calcium addition refers to adding calcium glycerophosphate when water does not reach the desired pH after electrolysis. Enagic notes that this may be relevant in areas with acidic source water or certain well-water conditions.

Can LeveLuk be used overseas?

LeveLuk units made for the USA may need adjustment for local voltage, water quality, and filtration needs before overseas use. Export rules and local laws must also be considered.

Are there cautions for using LeveLuk in cold regions?

Yes. Keep the hose lower than the appliance when turning off the water so automatic draining can work. If water remains in the machine or hose, freezing may cause problems.

What should I do if I am still waiting for my Enagic machine or product?

Track the shipment with the provided tracking number. If more than 20 days have passed from purchase, contact the local Enagic branch immediately. The FAQ says claims are not accepted after 30 days from confirmed delivery.

How can I purchase Enagic® products?

Enagic products are sold through Independent Distributors or local Enagic branch offices. Enagic says it does not sell products on third-party sites such as Amazon or eBay.

What certifications does Enagic list?

The Enagic FAQ states that Enagic International is certified to ISO 9001, ISO 14001, and ISO 13485 and is a member in good standing of the Direct Selling Association.

⇩

Watch the video

Enter your details to start watching.